Hi,
I wonder if you could help diagnose and resolve the problem with my Paramount ME.
The mount was powered on and found to be completely unresponsive. No LEDs lit, no beeping, no homing, nothing. Removed all cables apart from power and joystick, and the mount was still dead. 48v PSU tested OK. Replaced slowblo fuses to no effect.
Measured voltages on adaptor panel and found no 12v or 5v on the power supply connector. From this determined that the 618-OC112SC2448U1A DC/DC Converter module was the likely culprit. This was replaced. The adapter panel now correctly reads 12v and 5v, however when connected and powered on both RA/DEC LEDs and the System LED flash alternately, but the mount is still dead.
Mount was purchased in June 2007. The Adapter boad is a red Rev E.