Hello,
I have a Paramount ME, driver version 1.99 and firmware version 1.1.45 that is permanently mounted and that I've been using with TheSkyX professional. Both are great products. About a month ago I had to re-purchase and re-install the SkyX as the result of a computer problem. Since reinstallation, the mount connects and homes, but the telescope points about 2 hours or more off to the west in right ascension when slewing to a target despite the fact it shows centered on the target in the display. (I'm in the Northern Hemisphere). Interestingly, if I disengage the RA gears and move the mount by hand in RA until it points the same place as is indicated on the display, the mount seems to track and slew properly after I re-engage RA gear.
The location setting is correct and the time is as well. I've used the TCS to reset default settings for a Paramount ME and I've searched the Knowledge Database and reviewed the manuals, but. I couldn't find a solution. Sorry if this is a repeat question, but I'm out of ideas,
Thanks,
Brad Mead